Skip to main content

Filter By:

BMX

Odyssey Cable Knarps
$4.00
- Sold in pairs - Allen wrench included
Odyssey Key Chain
$33.99 - $39.99
Traditional chain pins are 3mm in diameter. The Key Chains are 5mm, and they are available with a hollow or solid pin assembly. These oversized pins are 4 times stronger than traditional pins, and the chances of bending one, whether the pin is hollow or solid, are essentially zero. The 5mm riveted pins provide added strength, but they also provide a bigger contact surface with the chain’s plates, which makes them harder to push out or bend. The hollow pin assembly, by design, allows for a stronger rivet connection to form during manufacturing, resulting in a stronger chain overall. Each plate has a low profile and an extra narrow waist that makes it harder to catch the plates at unwanted times. At 1.4mm, the plates are substantially thicker than the plates of any other chain, and they’re also more than 50% harder to bend than the thickest existing 1.2mm chain plates too. Users can break and re-join the chain with just a 3mm hex key. The chain’s half link plates are taller at the bends to both increase stiffness and minimize stretch. Since the use of a chain breaker to re-join the chain has been eliminated, the pins can retain their original level of tightness from the factory. Also, carrying a spare master link and 3mm allen key in most cases is enough to repair the Key Chain when riding, so lugging around a chain tool is usually unnecessary. By using material as efficiently as possible, Odyssey has strengthened every component of the chain and kept the weight in the same range as their Bluebird chain. Stretching of the chain is minimized by using a standard alternating plate pattern and limiting the chain to a single, beefed up half link. This configuration maximizes the lifespan of the sprocket and driver. - Width: 1/8-inch
Odyssey M2 Monolever Brake Cable
$5.99
The M2 lever works with a single cable or Odyssey's dual cable system. - Improved braking power for Gyro users - Left/Right hand compatible
Kink 2XOG Peg
$12.99
Kink BMX got its start making axles and pegs in the 1990s, so you could say we've learned a thing or two about making pegs over the years. The Kink 2XOG (aka Double OG) pegs are all about simplicity and durability. The no-frills, forged, machined, and heat-treated SCM415 steel construction 2XOG pay proper homage to the classic indestructible Kink OG pegs. Generous 4.5" length, 1.45" diameter, and classic Black Oxide or Chrome finishes. Steel is real. TECH SPECS - Material: Heat treated SCM 415 steel - Length: 4.5" (114.5mm) - Diameter: 1.45" (37mm) - Size: 3/8" and 14mm - Weight: 7.3oz (each)
Kink Brake Mount Kit
$14.99
Our updated removable brake mount kit includes everything you need to attach brakes to your Kink frame. This through-bolt style brake mount design fits late 2016 and newer Kink frames, as well as several other popular brand BMX frames. The kit includes brake mounts, brake mount bolts, cable stop, and barrel adjuster. TECH SPECS - Includes: Brake Mounts, Bolts, Cable Stop, and Barrel Adjuster - Features extended bolt-in mounts, fits 2016 and later Kink frames, and fits with most popular BMX brands. - Weight: 1.5oz
Kink Drift Peg
$17.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. Drift pegs have a 1.5" outer diameter. Replacement sleeves are also sold separately. TECH SPECS - Material: 7075-T6 Aluminum core w/ nylon sleeve - Diameter: 1.5" (38mm) - Axle Size: 3/8" and 14mm - Weight: 3.4oz (each)
Kink Drift Peg Sleeve
$5.99
The Kink Drift pegs are made of a tough 7075-T6 aluminum core and replaceable durable nylon composite outer sleeve. Kink spent nearly two years developing this unique nylon material that provides the perfect combination of slide and wear resistance. When it does eventually wear out, this nylon sleeve can easily be replaced so your pegs slide like new. - Nylon sleeve only
Kink Eastman Guard Sprocket
$49.99
The Kink Eastman full guard sprocket was designed to take a beating, and its built-in guard will protect your chain in the process. The machined crank arm reliefs create proper clearance for all popular cranksets, and the guard offset accommodates all chain widths, which gives the Eastman sprocket maximum compatibility. Its technical design creates a clean and symmetric aesthetic and provides massive strength where it’s needed. Two rotation positions extend the life of the Eastman’s built-in guard even further. - Material: Fully CNC Machined 6061-T6 Aluminum - Thickness: 12.5mm Overall (8mm at Spindle) - Compatibility: 19mm, 22mm, and 24mm Spindles - Weight: 5.3oz (25T)
Kink Fork Cap Bolt
$9.99
The Kink fork cap bolt aims to make things just a little more convenient and is keyed for both a 6mm allen key and 3/8" ratchet drive. The cap itself is CNC machined from high-grade 7075-T6 aluminum to provide the strongest threads possible. The M24×P1.5 thread size is standard across all Kink forks, and on a majority of other forks, as well. TECH SPECS - Thread Type: M24×P1.5 - Tool Type: 3/8" Ratchet and 6mm allen hex - Material: 7075-T6 Aluminum - Weight: 0.8oz
Kink Myriad Gyro
$34.99
The Kink Myriad Gyro features a fully CNC machined body, made from 6061-T6 aluminum. The low stack design increases cable pull, and the inner nylon bushing provides a smooth, maintenance-free spin. The Kink Myriad gyro uses a knarp-less design and works with most standard gyro cables. TECH SPECS - Material: 6061-T6 Aluminum - Bushing: Smooth nylon - Weight: 1.1oz
Kink Myriad Gyro Plate
$12.99
The Kink Gyro Plate is CNC machined from 6061-T6 aluminum, giving it a sleek and rigid design. The size is universal and will fit most modern (1 1/8") stems. This plate pairs perfectly with the Kink Myriad gyro, but will also work with other popular gyros on the market. TECH SPECS - Material: 6061-T6 Aluminum - Size: Universal - Weight: 0.4oz
Page 1 of 1