Parts

Designed exclusively for use with the Kink Boulevard front hub, the Boulevard guard is injection molded from durable nylon material. These guards slide directly over the existing hub hardware, so no additional parts or disassembly are required. This guard can be used on one or both sides of the Boulevard hub, providing protection where you need it.

- Converts Schrader rims to Presta - Rubber - Sold individually

- ProLock: pre-prepped/treated nipple threads with special compound - Hexhead (14g only) design for building/truing at nipple head, in addition to 4-sided flats at rim protrusion - Form-A design assures smooth fit and build - Cold-forged nipple blank machined to DIN 79012 specs - 14mm overall length (2mm taller hexhead for wrench interface, but protrusion through rim is the same as a 12mm DT nipple) - 2.0mm (14g) spoke thread interface with full run-through - Made in Switzerland. - Box/100

Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 5mm ID for use with most braking cables

- Precision-machined cable ferrules for improved braking and shifting performance - A flat bottom on the inside prevents housing from pulling through ferrules. - 4mm ID for use with most shifting cables

- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately

- Microspacers ensure the correct fitment of integrated headsets - Use between the top cover and the compression ring to ensure the top cover does not contact the headtube - Sold in bags of 10

- Longer B-screw needed when using 40t or 42t cog with most Shimano derailleurs

- Crank dust cap - Works with most three-piece crank models

- Aluminum w/lock nut and mount - Slotted mount design

The Master Clamp bolt kit is a custom-designed nut and bolt set that works with most frames using integrated seat clamps and many traditional seat clamps as well. The bolt features a unique head design, that accommodates both a 5mm and 6mm allen key. This seemingly small feature makes things just a little bit simpler because we all know the feeling of grabbing the wrong size allen key wrench. This also means no matter which seat system you use, you'll only need one allen key to adjust the entire seating setup. TECH SPECS - Material: Hardened Steel - Installation: 5mm or 6mm Allen Key - Weight: 0.3oz

Replacement O-ring for the Senec Pedal.

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.

- Hoods with (FD) are Flight-Deck compatible

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

- Sunlite Cottered Pins

- Compatible with Shimano HG40/50/70/90 chains - KMC Z50, Z7, Z8, X8.93, X8.99 chains - Reusable - No Tool Required - Pin Length: 7.3 mm

Finish off that great road bar tape job with Origin-8's Rubber End Plugs. These plugs come in a variety of colors to dress up your rig and fit most handlebars.

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Shifting cables for Road/Mountain bikes.

Chain tensioner bolts that fit all current Kink aftermarket frames. - Thread: M6 x P0.7mm

Lizard Skins grip donuts feature a neoprene material printed with the Lizard Skins logo and add comfort to the flange side of the grip.

Standard replacement star nuts for threadless steerers.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle