Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$19.99
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location.
Key features:
- Blendr is an elegant, integrated accessory mounting solution
- Provides clean and secure mount for GoPro camera
- Works with any Blendr-compatible stem and the accompanying base
- For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$7.99
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride.
Key features:
- Universal crank magnets work with any cadence sensor
- Get the perfectly sized magnet, sized right for your bike and sensor
- 20mm cadence magnet improves signal for wider gaps between crank and sensor
$59.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
$59.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs.
• ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor
• ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone
• For use with many ANT+ and Bluetooth Smart wireless technology enabled devices
• Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery
• Works with Trek DuoTrap compatible bikes
$19.99
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible.
• Mount your hard-shell smart phone case to your bike
• Allows for easy access of phone on stem or handlebar
• Includes Insta-Mount, universal mount, and application grid
• Blendr-compatible
$3.99
- Replacement parts and accessories for SpeedTrap Digital Speed Sensor
- Fork Cap covers SpeedTrap pocket when sensor is removed
- Spacer is required on some forks to position sensor closer to wheel magnet
$34.99
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
$59.99
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices.
- No tangled wires on your bike to connect the sensor to your device.
- Provides accurate speed data during your ride
- Provides accurate cadence data during your ride
- BlueSC comes with a rubber band mount and zip tie mount.
- The Blue SC sensor will fit with most bikes and frame sizes
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
$25.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display mount.
- Left- and right-side compatible.
- Mountain bike design situates a CPU above stem.
- Fits 35mm handlebars.
$25.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- MTB-style above-the-stem mount.
$25.00
Securely holds your Turbo Connect Display/Speedzone 2 computer.
- Specialized Turbo Connect Display (TCD)/Speedzone 2 Display mount.
- Left- and right-side compatible.
- Road-style above-the-stem mount.
$200.00
Charge your Specialized Turbo battery with this high output, custom Li-ion charger.
• Custom Specialized Li-ion battery charger
• Output: 42V4A
• Compact design while delivering huge power
• With Rosenberger plug and light indication of the charging status
$125.00
Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more!
- Standard: 9 – 30mm
- Wide: 23 – 40mm
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705.
- Glass-filled nylon, stainless steel Torx T25 bolt
- Weight: 20g
$129.00
- Shift buttons mounted to the end of a bar plug
- Included wire connects to Blip Box
- Fits bars with 19 - 20.5mm inside diameter
$118.00
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want.
- Limitless remote shifting positions for drop and aero bars
- Wired shift buttons can be positioned however the rider prefers
- Connect to Blip Box or drop bar eTap levers
- Compatible with SRAM RED eTap shift/brake controls
$415.00
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero.
- Replaces standard drop bar shift levers
- Simple and intuitive eTap shift logic
- AXS enabled for easy personalization
- Limitless aero configurations
- Two ports per side for Blips
- Fits the included optional stem mount
- Compatible with existing eTap Blips and Clics
- Mounts inside stem faceplate cap, feed box or frame
$17.00
- Use to keep Blips in place on handlebars
- Fits 31.8mm round portion of drop bar
- Clamp mounts directly to bar outside of tape zone
- Ideal for use with thumbs or index fingers while hands are on the tops
- Right and left specific, just like Blips
- Weight: 12 grams (for pair)
- Material: Polypropylene
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$21.00
External Blip mount for aero extensions and base bars
- 360 degree rotation for adjustment
- Aero use only to fit 22.2mm OD bar 65mm in length
- Fits all Zipp aero extensions and base bars
- Blips not included
- Weight: 57 grams for pair (does not include Blip)
- Material: Polypropylene + TPE
- Compatibility: 11-speed
- Recommended Group: SRAM RED eTap
$9.59
Replace your worn or damaged wiring on Origin8 wired computers (97517 / 97570)
- Includes bracket with (155cm) wired sensor, screw magnet and 4 cable ties
- Includes: Wiring Kit
- Compatibility: Data Station 8 / 10
** HEAD mount is HANDLEBAR mount only (not stem)
$37.99
• Handlebar mount for Garmin Edge 200, 500, and 800
• Fits handlebars 22.2 to 31.8mm (Shims included)
• Forged and CNC`d alloy construction
$37.99
- CNC machined AL6061 alloy GoPro mount for handlebars or seatposts
- Accepts GoPro mounting style compatible accessories
- GoPro mount rotates 90° for ideal positioning of accessories
- Fits 22.2mm, 25.4mm, and 31.8mm handlebars with included adapter
- Fits 27.2mm, 30.9mm, and 31.6mm seatposts with included adapter
$29.99
- Lightweight nylon fiber Garmin handlebar mount with 90-degree rotating mounting plate
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000
- Out-front mounting position centers the computer in front of the stem
- Fits both 25.4mm and 31.8mm handlebars with included adapter
$37.99
- Lightweight nylon fiber Garmin handlebar mount with CNC machined AL6061 alloy GoPro mount
- Compatible with Garmin Edge 200, 500, 510, 520, 800, 810, and 1000
- Accepts GoPro mounting style compatible accessories
- Out-front mounting position centers the computer and accessories in front of the stem
- Fits both 25.4mm and 31.8mm handlebars with included adapter
$19.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
- Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$44.99
- Discreet way to install an Apple AirTag inside your tubeless tire
- Identify the location of a stolen bike, enabling the owner to alert local authorities for retrieval
- AirTag is housed in a 3-part silicone and rubber tubeless valve mount
- Sacrificial stem, ensures tracker and rim protection under impact
- Silicone top cover protects tracker and internal plug reduces sealant ingress
- Supplied with 3 pairs of our rubber valve bases to suit different rim profiles for the optimum seal
Note the Tubeless Secure Tag Holder can only be used in rear wheels – not for use on the front wheel Compatible tire types:
- MTB tyres (XC, Enduro Trail, Downhill)
- Gravel Tires (the narrowest recommended tyre size is 38mm wide)
$19.99
Constructed from a high quality proprietary polymer blend that is super durable.
- Securely locks and perfectly positions your computer
- Fits 31.8, 25.4 & 22.2mm handlebars
- Simple one-bolt design makes installation a breeze
- Compatible with Garmin Edge 20, 25, 130, 510, 520, 530, 810, 820, 830 & various other cycling computers
- Not compatible with Edge 1000 series
$19.99
Constructed from a high quality proprietary polymer blend that is super durable.
- Securely locks and perfectly positions your computer
- Fits 31.8, 25.4 & 22.2mm handlebars
- Simple one-bolt design makes installation a breeze
- Compatible with Wahoo Elemnt, Elemnt Mini, Elemnt Bolt and Elemnt Roam
- Also compatible with Pioneer computers