Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

The Bontrager Carbon Stop Cork pad was engineered by Keith Bontrager specifically to work with carbon rims. Designed to dissipate heat on long descents and decrease rim wear, they will keep you coolly in control on even the most challenging mountain stages. Key features: - Engineered especially for use with carbon rims - Designed by Keith Bontrager for professional cyclists - Unique cork compound reduces braking heat and wear on rim

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

Origin-8's one-stop-shop ATB V-brake Kit has all you need to stop your bike: levers, cables, housing, and brakes. For easy installation and set-up, the forged aluminum brakes feature dual spring tension adjustment while the levers sport reach adjustment.

The short blade design of the Origin-8 Mini Trigger Brake Lever gives a clean, sleek look—with great stopping power—to your handlebars. • Designed for caliper & cantilever brakes • Cold forged double bent lever blade • 1-finger lever blade • 22.2mm (7/8") clamp • Short blade design • Left hand • 76g each

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Tektro IOX, Lyra, Novella Post 2010

- Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) - 22.2mm (7/8") clamp - Return spring/reach adjustment - Forged alloy construction - 3-finger lever design - 206g pair

- Available in both short- and long-pull versions - Forged AL6061 alloy construction - 3-finger lever design with laser-etched grip pattern - Return spring with reach and cable adjustment - 22.2mm (7/8") knee-friendly clamp - 195g pair

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

With a focus on reduced weight and cross-country tuned stopping power, Shimano Deore XT brakes provide intuitive modulation so that you can explore your limits with confidence. The levers feature an optimized lever axle position, refined ergonomics, and increased rigidity thanks to an additional handlebar contact point. The BR-M8120 4-piston calipers are designed for tough enduro trails and include heat-dissipating finned metal pads. - 10% stiffer than previous generation M8000 even under high-temp conditions - Quicker brake engagement with a shorter free stroke - Tool-free reach adjustment - Free stroke adjustment - I-SPEC EV Clamp Band - Brakes are pre-bled for convenient installation

- R50T2 compound brake pads for BR-4600 - Also fits BR-4600, BR-3400 and BR-R450 - Adjustable toe-in and contact angle - 5 pairs

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - More predictable, linear braking curve - Narrower gap between arms - Compatible with wider 28C tire size - Clear contact feeling with balanced rigidity, weight and stopping power - Sleek design - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Magura Storm CL Disc Brake Rotor - Centerlock with lockring for thru axle

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad material: steel - Compound: semi-metallic - Compatibility: Magura MT5, MT7

With quicker brake engagement and shorter free stroke, the Shimano Deore BR-M6100 brake set delivers intuitive braking so you can stay focused on the trail ahead. The I-Spec EV shift lever offers a wider adjustment range for superior rider tuning. - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-Spec EV shifting lever - Lever/caliper sets sold individually for front or rear.

Lock rings for all TRP Centerlock Rotors

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

- Top mount levers for use with caliper or cantilever brakes - Forged aluminum - Hinge clamp style - Return spring and reach adjustment - Black - 90g / pair

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm

Magura speed sensor magnet for disc rotor. - Compatible with Magura Storm HC 180mm rotor - Compatible with Magura MDR-C 180mm and 203mm rotors

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Compatible with both road and mountain bike brakes - Rounded edges are UCI-compliant and allow for easier wheel installs - Hub interface: CenterLock - Rotor Type: Centerline

Shimano BR-M375 Mechanical Disc Brake Caliper - Pad adjust tool size unified to 5mm allen key - Quick/fast assembly - Light braking operation for easy/long riding - Clean cable routing in combination with both chain stay and seat stay mount - Brake power same as BR-M416A - 20% pad clearance increase - Cable actuated - Single 74mm caliper - For use with Linear-pull MTB levers - B01S Resin Pads - Rotor not included - Frame or fork mount adapter and rotor not included - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull

Replacement EBT screws close the bleed port on Magura brakes. - Torque spec: 0.5 nM - T25 head

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

SRAM's Force Pad & Holder includes SwissStop pads for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

- Attachment parts for Magura OEM and braided-stainless hydraulic disc and rim brake tubing

SRAM's S-700 Shift Lever w/Hydraulic Disc Brake delivers pro-level shifting performance, excellent ergonomics, and the power and modulation of hydraulic disc braking. Feel the ergonomics and response of SRAM’s DoubleTap shifting as you drop a gear for that grueling climb or ratchet through the 10 speeds in that frantic sprint finish. Once you give the brake lever a squeeze, all that great shifting seems like icing on the cake. You’ll instantly notice that the hydraulic disc brake requires less hand force than a traditional cable-pull brake, and provides incredible power and modulation that makes every road or cross ride better.

The cores of brake performance are consistency, reliability, and trust. And, with G2 R, we focused on offering a premium value without compromising the heart of the operation. This brake gives riders the G2s famed "Mini-Code" power and a whole suite of SRAM standard features at an absolutely unbeatable value. - Power organic pads give riders both feel and bite - Engineered for easy installation and maintenance - Tools-free reach adjust for quick personalization

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers

2-piece center lock rotors for use with Campagnolo hydraulic brake systems. - Rounded external edge prevents cutting of skin in case of contact with rotor - Inner aluminum spider maximizes heat dissipation - EKAR rotors are strong 1.85mm thick stainless tempered steel - Strong, durable, light & resistant to corrosion Specifications: - Rotor Type: Two Piece - Hub/Disc Compatibility: Center-Lock Disc - Pad Compatibility: All Pad Compounds

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

- Replacement caliper for Force eTap AXS

Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT

SRAM's Pad Inserts for carbon wheels are the perfect upgrade for your brakes to deliver excellent stopping power and speed modulation. The secret is SwissStop's proprietary yellow compound that resists heat buildup for a consistent grip without being "grabby." They have deep grooves to whisk away water so they're perfect for road and cyclocross alike.

Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Replacement pads for the popular Magura HS33 and HS11 brake systems. Features rim-friendly compounds: - Black - Standard compound which is great for all weather conditions, but designed for dry condition riding. - Salmon - One of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Dual - A fusion of black and salmon compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Electric- This compound is formulated specifically for the higher speeds and weights of electric bicycles. - Ceramic - This compound was designed for ceramic coated rims and is great in all weather conditions. - Trials - An extreme compound for only experienced trick or trials riders needing a compound that will instantly lock the wheels.

For use with 2000+ Hayes 74mm eye-to-eye calipers (adapters/calipers for 22mm mounts are no longer available) - (IS) International Standard 51mm tabs; (QR) Quick Release; (TA) thru-axle - Note: Fox-36/40 (thru-axle), Rock Shox Pike (Maxle), and Psylo (Tullio) axle forks use IS-QR adapters

TRP’s new slotted rotor is designed for the most demanding riders in the most demanding conditions. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Single piece design for weight savings - Weight: 117g (160mm)

Jagwire's LR1 Pro Lightweight Rotors are a stylish way to upgrade the performance on your bike. Utilizing a 2-piece construction, they feature a separate aluminum spider and stainless steel brake track. The steel braking surface delivers quiet, consistent performance while the spider helps reduce rotating weight by about 15% compared to a traditional single-piece rotor. - The high quality, durable stainless steel machined braking surface ensures consistent stopping power and superior modulation - Lightweight aluminum spider keeps weight to a minimum - Available for either Center Lock or 6-Bolt ISO hubs - NOTE: LR1 rotors are NOT compatible with brakes when the pad extends below the caliper body. Examples include Avid BB7, Avid Juicy, Hayes HFX, and Hayes MX1

Shimano's XT Ice-Tech rotors utilize their patented Center Lock mounting system for super quick and easy mounting. These rotors use an aluminum core with steel outer plates which reduces the temperature of the braking surface. This means quieter braking, and more importantly, less fade on long downhill sections and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Jagwire's Mountain Sport Disc Brake Pads (Hayes) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

- T100 Sintered Metallic: long-life, all-condition compound - T106 Semi Metallic: no-bed, shorter-life, quieter compound - Set includes one pair of pads with retention clip

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

Aluminum spider center lock rotor mount system - Includes standard type rotor lockring - For use with resin or metal pads - Requires external-type rotor lockring when installing onto 15/20mm axle hub - 160, 180, and 203mm rotors available - 12g lighter than SM-RT62

- Adapts 35mm CenterLock rotor-mount splines to accept an International Standard 6-bolt, 44mm BCD rotor - Does not fit Saint-style 47mm Oversize CenterLock, and will not work with thicker, aluminum-carrier Hope 2005+ style Mono-series rotors - Designed for up to 210mm rotors - Tabs in adapter mate to (6) M5 rotor bolt holes and is secured by CenterLock-style lockring, sandwiching 6-bolt rotor to adapter - Lockring requires a 16-notch external bearing bottom bracket wrench - CL-IS adapter is black and lockring is black with silver etching: 29g

Hope Mono Mini Disc Brake Pads. · Sintered: high-graphite compound; best for wet weather durability · Organic: Softer compound than sintered, works better in dry conditions, but wears faster · Fits Tech and Tech Evo M4 Brakes

Compatible with caliper and cantilever brakes - Forged aluminum lever and body - Ergonomic 2-finger lever design - Return spring with reach and cable tension adjust - Hinged clamp allows installation without removing grips/tape - Fits 1.5-1.6mm brake cable type - 90g pair

Shimano D02S Metal Disc Brake Pads keep you under control in any conditions. - Fits Saint BR-M820/810 and Zee BR-M640 calipers - Sintered Metal pad with consistent, high stopping power in wet or dry conditions and excellent durability