Brakes/Levers/Pads

Meet the new standard for hard-hitting, heavy-duty braking. We added 15% extra piston power and 30% more volume in the lever reservoir, ensuring peak performance for the full run. And with SwingLink and Lever Pivot Bearing technologies, lever feel remains smooth and progressive, no matter how hard the pull. Go deeper and grab more power. - Designed specifically for heavy-duty demands. - Pivot bearing offers crisp lever feel and a fatigue-free ride. - Metallic pads come standard for more power and longer wear.

Original equipment pads for no-compromise disc brake performance. - Steel backed organic pad is quiet - Each pad kit includes two pads, a pad spreader spring, guide pin and clip - For use with Level, Level TL, Level T, Level Ultimate, Level TLM (B1, 2020+), DB, Elixir, and 2-Piece Road

The CenterLine design provides a smooth, consistent, and quiet running braking surface. Rounded edges make for easier wheel installs and are UCI-compliant. - Rounded edges are UCI-compliant and allow for easier wheel installs - Compatible with both road and mountain bike brakes - Includes steel rotor bolts

- Aluminum pad holder with R55C4 pads

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Oversized tire deflector - Length of Pad: 55mm - Compound: All Weather

The Campagnolo 03 rotors were designed to ensure optimal resistance to overheating, thus guaranteeing greater braking capability even in the most critical situations. - Designed to be used with Center Lock or AFS systems - Feature a rounded UCI compliant edge for safety and easy insertion into calipers

• Truly universal compatibility (adjustable cable pull for linear/mech disc or caliper/cantilever) • 22.2mm (7/8") clamp • Return spring/reach adjustment • Forged aluminum construction • 2-finger lever design

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

The secret to great fun on any ride is confident and secure braking. Letting it rip where you want, knowing that you can stop when you want. Enter the Apex 1 HYDROR. Using SRAM's proven HYDROR braking system, the Apex 1 delivers quiet confidence on every ride. - Uses DOT 5.1 brake fluid - Lever body design offers excellent finger wrap, comfort, and control - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Two piston hydraulic caliper - Moto-style means this is a left-side lever with a rear brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

Replacement copper washers for 5mm or stainless Hope hydraulic brake line.

Shimano 105 BR-R7000 road caliper brakes offer a clear contact feeling with balanced rigidity, weight and stopping power. - More predictable, linear braking curve - Narrower gap between arms - Compatible with wider 28C tire size - Clear contact feeling with balanced rigidity, weight and stopping power - Sleek design - Brake Mount Type: Short Reach Caliper (39mm - 49mm) - Brake Lever Actuation: Short Pull - Pad Type: Cartridge

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

For the Ultimate, we held nothing back. Our engineers sculpted the finest materials—titanium and carbon fiber—to make this our lightest four-piston brake ever. Power, modulation, and lever feel set a new standard. Personalization is quick and intuitive. And, for performance—well, our test riders didn't dub it the "Mini-Code" for nothing. - More caliper stiffness and a new pad compound with bite - Pivot bearings for crisp lever feel and a fatigue-free ride - SRAM's best power-to-weight ratio in a four-piston brake

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

- 55mm brake pad inserts for Origin8 Vise road cartridge brake pads - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Automatic toe-in alignment - Length of Pad: 55mm - Compound: All Weather

SRAM's Apex Brake Caliper Set is forged from aluminum for light weight and high strength. SRAM's powerful dual-pivot design offers excellent stopping power and great modulation. You'll appreciate the easy-to-replace cartridge brake pads, and the handy quick release and adjustment barrel too.

When you choose to ride, advancement means having a group that’s always ready. Apex 1 is that group. As a left lever for your Apex 1 setup, or paired for single speed adventures, the Apex mechanical brake lever features the same ErgoFit ergonomic design introduced on SRAM RED but delivered in a sleek, forged aluminum offer. - ErgoFit design from SRAM RED improves grip and finger wrap - Reach Adjust for a perfect fit - Durable, forged aluminum lever blade with laser texture for a positive touch

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

SRAM's Force Pad & Holder includes SwissStop pads for excellent braking. The holder design makes it easy to switch pads—meaning this system is great for road and cyclocross bikes alike!

- Lever blade kits sold each - Includes cam guide

- Non-Integrated brake levers for urban, Singlespeed, Cross, Tri and tt use - Ergonomic aluminum lever with grippy, textured rubber hoods - Includes spring loaded push button cable tension quick release.

Suitable for moderate use applications - All-around performance in mixed weather conditions - Good performance at high or low temperatures - Great pad life - Quieter than sintered pads - Pad Material: Steel - Compound: Semi-Metallic - Compatibility: Tektro IOX, Lyra, Novella Post 2010

Origin-8's one-stop-shop ATB V-brake Kit has all you need to stop your bike: levers, cables, housing, and brakes. For easy installation and set-up, the forged aluminum brakes feature dual spring tension adjustment while the levers sport reach adjustment.